OPERATING DATA | |
Operating weight | 2,041 kg |
Height to top of ROPS | 2,289 mm |
Transport length | 3,854 mm |
Width | 990 mm - 1,200 mm |
Rear swivel radius | 1,169 mm |
Superstructure slewing speed | 10.0 rpm |
Biting force (maximum) | 11.2 kN |
Breakout force (maximum) | 18.8 kN |
Digging depth (maximum) | 2,397 mm |
Dump height (maximum) | 2,621 mm |
Digging radius (maximum) | 3,989 mm |
ENGINE / MOTOR | |
Engine make and model | Yanmar 3TNV76 |
Engine performance | 17.7 hp / 13.2 kW |
RPM / speed | 2200 rpm |
Displacement | 1.1 l |
Fuel tank capacity | 24 l |
AdBlue tank capacity | N/A |
HYDRAULIC SYSTEM | |
Auxiliary Hydraulics | 25 l/min |
Pressure aux. relief | 200 bar |
Hydraulic oil tank | 19 l |
UNDERCARRIAGE | |
Length of travel gear | 1,607 mm |
Track type | Rubber |
Track chain width | 230 mm |
Ground clearance | 210 mm |
Travel speed (maximum) | 5.3 km/h |
Wacker Neuson ET18 VDS - Mini Excavator
Information
With the excavator ET18, Wacker Neuson is setting new standards in the 1.7 to 2.4 ton class. The combination of proven elements and intelligent development approaches provides a plus in performance and efficiency. Sophisticated features such as a large cabin and the two-part windshield mechanism also increase operator comfort.
Complete Product Information
VDS (Vertical Digging System)
- The vertical digging system compensates for slopes of up to 15 degrees, making it possible to vertically excavate on a slope. This is not only ergonomic for the operator, but it also saves time and also means less excavated material.
- Up to 25 percent material and time savings when excavating and filling. Safe working and higher stability in sloping spaces.
- The same swing power over 360 degrees allows fatigue-free work with the seat position remaining the same.
Powerful Drive System
Thanks to the high performance of the drive system, the maximum power of the excavator is available at every point of operation. This brings up to 30% higher power for an even better performance.
Hydraulic Telescopic Travel Gear
The hydraulically telescoped travel gear with a max. outer width of 1300 mm gives stability. In no time, it can be retracted to a width of 990 mm. With the foldable dozer blade extension, this makes individual adjustment to the job site conditions possible. Meanwhile, the extension elements are always connected to the machine and thus do not get lost.